Working principle The hot air tangent enters the bottom of the dryer, forming a strong rotating wind field driven by the mixer. The paste like material enters the dryer through a spiral feeder. Under the strong action of high-speed rotating stirring p…

Working principleThe material enters the machine from the feed inlet, and under the action of vibration, it is thrown along the horizontal fluidized bed and continuously moves forward. After the hot air passes through the fluidized bed and exchanges h…

Product OverviewSZG double cone vacuum dryer is a new generation drying device developed by our factory in combination with similar domestic product technology. The double cone vacuum adopts a belt chain elastic connection method, so the equipment run…

Working principleThe so-called vacuum drying refers to heating and drying dry materials under vacuum conditions. If a vacuum pump is used for air extraction and dehumidification, the drying speed is accelerated.Note: If a condenser is used, the solven…

Working principleThe so-called vacuum drying refers to heating and drying dry materials under vacuum conditions. If a vacuum pump is used for air extraction and dehumidification, the drying speed is accelerated.Note: If a condenser is used, the solven…

Product IntroductionSpray drying is widely used in liquid forming and drying industries. It is especially suitable for generating powdery and granular solid products from solution, lotion, suspension and paste liquid raw materials. Therefore, when the…

Product IntroductionThis unit is a device that can simultaneously complete drying and granulation. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spher…

Product IntroductionThe machine adopts a fully enclosed form, with all components made of stainless steel and equipped with a three-level purification device. The filtered air meets the requirement of 100000 levels. The cylinder and top are equipped w…

Product IntroductionThe CT-C series hot air circulation oven is equipped with a low noise, high-temperature resistant axial flow fan, and an automatic temperature control system. The entire circulation system is fully enclosed, which increases the the…

Product Description◎ There are three types of heating sources: steam, electricity, and electric steam.◎ Operating temperature: Steam heating at 50-140 ℃, up to 150 ℃; Electric heating 50-350 ℃;◎ The temperature is automatically controlled and re…

Product IntroductionFluidized bed drying, also known as fluidized bed, is composed of air filter, heater, fluidized bed host, cyclone separator, bag filter, high pressure centrifugal fan, and operating platform. Due to the different properties of dry …

Working principleAfter being heated and purified, the air is introduced from the bottom by an induced draft fan and passes through the mesh plate of the hopper. In the studio, fluidization is formed through stirring and negative pressure, and the wate…