Hotline:
+86-15851956577
Location: Home > Selection> Selection of Drying Equipment
Senmao Machinery · Selection
Selection of drying equipment
Selection of mixing equipment
Selection of granulation equipment
Selection of crushing equipment

Feedback Form for Customer Selection of Drying Equipment

Please fill out the form in detail so that our company can provide careful selection recommendations

*
*
*
*
1. Material:
Molecular formula:
PH value:
2. Form of dried materials:
Micropowder Powder Particle Massive Flaky Size Residue Paste Cream Solution Fibrous Emulsion Suspension
3. Other characteristics of the material:
Flammability Explosivity Agglomerability Peculiar smell

4. Name of the evaporated medium:

Molecular formula:

PH value:

Boiling point of the evaporated medium:

Do you need to recycle:  Yes , No
5. Initial moisture content of the material:

% ; Including water of crystallization:

Required moisture content after drying:

% ; Remaining water of crystallization is required:

% ;
6. Initial temperature of material:

℃ ; Temperature required after drying:

℃. Whether to use cooling for material collection: Yes , No
7. Maximum temperature that the material can withstand during drying:

℃; The optimal temperature range for material drying:

℃.
8. Softening temperature of materials:

℃; Melting point of materials:

℃.
9. Specific heat of materials:

KJ/kg. ℃; The thermal conductivity of the material:

KJ/m2.h. ℃
10. True density of materials:

kg/m3; Bulk density of materials:

kg/m3
11. Material particle size distribution range:

mm(mesh) to

mm(mesh); Proportional content≥

%
Among them: maximum particle size

mm(mesh); Proportional content≥

%
Minimum particle size:

mm(mesh); Proportional content≥

%
12. Requirements for particle size of finished products after drying:
mm(mesh)
13. Viscosity of the material in its original state:
Lipo (cp); Does heating reduce viscosity: Yes ,No
14. Can the form of the material be damaged during drying: 可以 不可以
15. Product yield after drying:
kg/h; (or wet material handling capacity:
kg/h)
16. Drying method requirements:
Continuous , Gap , Dynamic , Static , Hot air , Vacuum , Microwave ,

17. Previous drying methods for materials or similar products:

Desired dryer model:

18. Air inlet requirements:

Natural wind harvesting , 300000 level filtration , 100000 level filtration , 10000 level filtration ,

19. User's material requirements for drying equipment:

The material contact is made of stainless steel , All Stainless Steel , Titanium material , Aluminum alloy , Carbon steel , Glass lining , Tetrafluoro ,

20. Proposed stainless steel model:

SUS304 , SUS321 , SUS316 , SUS316L , SUS2235 ,

21. Requirements for material recovery rate: ≥

%; Dust environmental emission requirements: ≤

mg/nm3 ;
Environmental emission requirements for exhaust gas: ≤

mg/nm3; Maximum allowable discharge requirements for wastewater and waste liquid ≤

mg/L
22. Thermal medium and heat source used during the drying process: hot water

℃ ; Steam

Mpa ; Heat transfer oil

℃ ;
Electrical heating , JRF , Oil hot air furnace , Gas hot air stove ,

23. Thermal medium and heat source:

Self-provide , Purchase separately , Kitting ,

24. Cleaning and hygiene requirements for equipment:
25. Equipment usage location:

Altitude:

Humidity:

Maximum temperature:

Minimum temperature:

Annual average temperature:

other:

26. Budget investment amount for purchasing equipment (RMB):

Ten thousand yuan
27.Other requirements:
Verification:

About
Company Profile Corporate culture
Products
Drying equipment Granulation equipment Hybrid Equipment Crushing equipment Screening equipment Heat source equipment Dust removal equipment Other equipment
News
Company News Industry News
Contact
+86-15851956577
Add: Jiaoxi, Zhenglu Town, Changzhou City,
         Jiangsu Province, China
Copyright © 2023 Changzhou Senmao Machinery Equipment CO., LTD All Rights Reserved Support: Eastnet
Top